Linux
Kernels 2.6.25 through 6.1.x
(32/64-bit)
LEGACY FILES

v2.24

Refer to the readme file bundled with the driver for installation procedures. You can also download LCOM, which can be used for testing serial ports on a Linux system.

QNX 6
  

(32-bit)

v6.32D

Make sure that the file extension is an uppercase F. Some browsers download the file with a lowercase f file extension, if that occurs; change the file extension to uppercase before installing the driver.
  

See the readme file with the driver assembly.

Windows 7 through Windows 10
  

Windows Server 2012 through Windows Server 2019
  

(32/64-bit)
  

Polling or Interrupt Driven
  

LEGACY FILES

v5.18

If you are running the v4.16 driver, you do not need to upgrade to the new driver because functionally, it is the same driver.
  

This driver supports both polling or interrupt driven modes. The default is set to Polling.
  

To install the device driver, execute the .exe file and follow the installation wizard.
  

High Throughput Streaming Data or Fast Response Requirements.

All

RocketPort INFINITY User Guide

Rev G

Provides hardware installation information.

Linux

Using minicom for Testing

Rev C

This document discusses using minicom, a built-in serial communication utility. You can use minicom for sending commands to attached modems.

Windows XP through Windows 7

Device Driver Installation Guide for Windows

Rev A

This guide provides detailed installation and configuration information for the device driver for Windows.

Windows XP through Windows 7

Port Monitor (PMon2) and Test Terminal (WCom2) User Guide

Rev B

You can use the Port Monitor (PMon2) and Test Terminal (WCom2) User Guide, which provides procedures for using both Test Terminal and Port Monitor to test ports and communications.

Windows 2000

Device Driver Installation Guide for Windows

Rev C Legacy

This guide provides detailed installation and configuration information for the device driver for Windows.

Windows XP

RRAS Overview for Windows XP

Rev A

Overview for Windows XP RRAS configuration.

Linux

LCOM Utility

v1.06

Use LCOM for testing serial ports.

Windows XP through Windows 10
  

(32/64-bit)

Pepperl+Fuchs Comtrol Utility (32/64-bit)

v4.11

The Pepperl+Fuchs Comtrol, Inc. Utility contains Test Terminal and Port Monitor.
  

You can use the Port Monitor (PMon2) and Test Terminal (WCom2) User Guide, which provides procedures for using both Test Terminal and Port Monitor to test ports and communications.

All

Diagnostic CD Image

v2.12

You can use the previous discussion for information about creating and executing the bootable Diagnostics.