DeviceMaster UP PROFINET IO Firmware

Name Supports DeviceMaster UP PROFINET IO

PROFINET IO firmware v3.4.0
Bootloader v4.38

Please contact Pepperl + Fuchs Technical Support for firmware by selecting the Contact Us tab.

DeviceMaster UP PROFINET IO Utilities

Operating System Name Version Description

Linux

Firmware Upload Utility

v1.06

You can use this utility to upload firmware (Bootloader and EtherNet/IP) on a Linux system. Optionally, you can use RedBoot to upload firmware.

Windows XP SP3 through Windows 10

  

(32/64-bit)

PortVision DX

v3.05

You can use PortVision DX to identify, configure, update, and manage the DeviceMaster Industrial Gateway.

  

PortVision DX is the easiest way to program the IP address and upload firmware. You can use the help system for information about using PortVision DX.

  

This version supports older DeviceMaster Industrial Gateway hardware and firmware versions. If you are unsure what version of PortVision DX to use, load this version first. It is easier to upgrade PortVision DX (takes about 3 minutes) but it is more difficult to downgrade the PortVision DX version.

Windows XP SP3 through Windows 10

  

(32/64-bit)

PortVision DX

v5.01

You can use PortVision DX to identify, configure, update, and manage the DeviceMaster Industrial Gateway.

  

PortVision DX is the easiest way to program the IP address and upload firmware. You can use the help system for information about using PortVision DX.

  

If this is an initial installation with newer DeviceMaster Industrial Gateway hardware and firmware, use this PortVision DX version.

DeviceMaster UP PROFINET IO Documentation

Name File Description

PROFINET IO User Guide

Rev A

Installation and configuration information for PROFINET IO. The User Guide provides all hardware installation and PROFINET IO configuration information.