Your automation, our passion.

+1.763.957.6000  |  Pepperl+Fuchs Comtrol 

RocketPort USB Serial Hub II Device Drivers

Operating System Device Driver Document

Linux
  

2.4.x through
  

4.10.x kernels

Supported in the Linux Operating system

You can use the Linux installation page for installation procedures.

Windows 10
  

Windows Server 2016
  

Windows 8/8.1
  

Windows 7

Supported in the Operating System

Windows 10, Windows Server 2016, Windows 8/8.1, and Windows 7 have drivers included with the operating system.
  

Use the Driver Installation for Windows page for installation procedures.

  
If you require a driver for Windows 10, Windows 8.1, Windows 8, or Windows Server 2012, you will need to know the RocketPort USB Serial Hub serial number. The serial number is located on the bottom of the unit on the serial number and bar code label.

The following serial numbers, do not support Windows 10, Windows 8.1, Windows 8, or Windows Server 2012.

4-Port: Before 8295-006001

Windows XP through Windows Server 2012

v1.8.19

Use the Driver Installation for Windows page for installation procedures.

RocketPort USB Serial Hub II Supporting Documents

Operating System Description Acrobat Document

All

Serial Port Connections

Refer to the software installation documentation for hardware installation procedures for your operating system.

Linux
  

2.4.x through
  

2.6.x kernels

Driver Installation for Linux

Windows XP through Windows 10
  

(32/64-bit)

Driver Installation for Windows

Windows XP through Windows 7

Port Monitor (PMon2) and Test Terminal (WCom2) User Guide
  

(Rev B )

You may refer to the Test Terminal chapter in this User Guide to test ports with Test Terminal.
  

Use Test Terminal and a loop-back plug to test serial ports and verify port operation by allowing you to send data out the port on the transmit side, loop the data back to the receive side and view the received data on the screen.

RocketPort USB Serial Hub II Utilities

Operating System Name File Description

Linux

LCOM Utility

v1.06

Use LCOM for testing serial ports.

Windows XP through Windows 10

Test Terminal Utility
  

(32/64-bit)

v3.01

Test Terminal can be used to troubleshoot communications on a port-by-port basis. Test Terminal requires a loopback plug.
  

You can use the Test Terminal section in the Port Monitor and Test Terminal User Guide for Test Terminal test procedures.