Your automation, our passion.

+1.763.957.6000  |  Pepperl+Fuchs Comtrol 

These are Legacy files, which means that the product is considered an active product, however; downloaded files are AS IS (in mature status and are no longer updated). Limited Technical Support available.

  
Typically, you should load the latest firmware.

  
Depending on the model you purchased, it may or may not have EtherNet/IP loaded. The DeviceMaster UP may contain SocketServer, the default application from the factory. Models that have a protocol loaded on the DeviceMaster UP are identified in PortVision DX and the DeviceMaster UP is labeled accordingly.

  

DeviceMaster UP - PROFINET IO Software

Name File Description

PROFINET IO firmware
Supports 1-Port Panel Mount and 2-Port DIN Rail Models with serial numbers below 30000

Please contact Pepperl + Fuchs Technical Support for firmware by selecting the Contact Us tab.

You may need to upload PROFINET IO firmware to the DeviceMaster UP using PortVision DX before configuring the serial ports.

  

Refer to the PROFINET IO User Guide for detailed information about PROFINET IO and configuration.

  

If you need hardware information, refer to the DeviceMaster UP Hardware Installation and Configuration Guide.