U-Boot Bootloader v1.30
FPGA v1.12
System Primary/Backup uImage v1.36
Application Base v1.5.28

Please contact Pepperl + Fuchs Technical Support for firmware by selecting the Contact Us tab.

Windows XP SP3 through Windows 10
(32/64-bit)

v5.01

You can use PortVision DX to identify, configure, update, and manage the IO-Link Master and all other Pepperl+Fuchs Comtrol, Inc. Ethernet-attached devices.

You can use PortVision DX to perform the following tasks:

• Configure the IP address
• Upload the latest images or application sub-assemblies
• Access the IO-Link Master web configuration interface
• Save/load configuration files
• Reboot the IO-Link Master
• Reset to factory default values
• Access a Telnet/SSH session
• Toggle the IO-Link Master LEDs in the event you need to locate a specific IO-Link Master

Procedures to configure the IP address and upload software is available in the navigational bar at the left for your model.

You can use the help system for information about using PortVision DX.

IOLM 4-EIP
IOLM 8-EIP
IOLM DR-8-EIP

1.4.xx

v1.04

If you need information about using EDS files, refer to the IO-Link Master User Guide.

IOLM 4-EIP
IOLM 8-EIP
IOLM 8-EIP-L
IOLM DR-8-EIP
IOLM DR-8-EIP-P
IOLM DR-8-EIP-T

1.5.18

1.5.28

v1.05

If you need information about using EDS files, refer to the IO-Link Master User Guide.

Windows 2008 R1
through
Windows 10

v1.0

This AOI file assembly includes AOI files and two User Guides for RSLinx and RSLogix:

• IO-Link Master IO Installation and Configuration Guide
• IO-Link Master ISDU Installation and Configuration Guide

You need to also download the EDS files, whose installation is discussed in the User Guides.

IO-Link Master Program Examples

v0.04

This self-extracting zip file provides example PLC programs (L5K and ACD) for RSLogix 5000 based PLCs, such as the ControlLogix.

The integer interface example PLC programs (L5K and ACD) are designed to retrieve PDI data (no transmit of PDO data) and handle SPDU requests/responses.

The PDI/PDO integer interface example PLC programs (L5K and ACD) are designed to retrieve PDI data, transmit PDO data and handle SPDU requests/responses.

kernel

v1.02

buildroot

v1.04

application - JSON-C

v1.2.0.0

uboot

v1.06

IO-Link Master Library for EtherNet/IP and Modbus/TCP

Rev B

This document contains installation and configuration procedures for all IO-Link Master models with EtherNet/IP and Modbus/TCP loaded.

In addition, it provides all of the reference information needed for the EtherNet/IP and Modbus/TCP interfaces.